International Chemical Safety Cards

BISPHENOL A ICSC: 0634
BISPHENOL A
4,4'-(1-Methylethylidene)bisphenol
4,4'-Isopropylidenediphenol
C15H16O2/(CH3)2C(C6H4OH)2
Molecular mass: 228.3
CAS # 80-05-7
RTECS # SL6300000
ICSC # 0634
TYPES OF
HAZARD/
EXPOSURE 		ACUTE HAZARDS/
SYMPTOMS 		PREVENTION FIRST AID/
FIRE FIGHTING
FIRE Combustible.
NO open flames.
Powder, water spray, foam, carbon dioxide.
EXPLOSION Finely dispersed particles form explosive mixtures in air.
Prevent deposition of dust; closed system, dust explosion-proof electrical equipment and lighting.

EXPOSURE
PREVENT DISPERSION OF DUST! STRICT HYGIENE!

  • INHALATION
    		• Cough. Sore throat.
    		Local exhaust.
    		Fresh air, rest. Refer for medical attention.
  • SKIN
    		• Redness.
    		Protective gloves. Protective clothing.
    		Remove contaminated clothes. Rinse skin with plenty of water or shower.
  • EYES
    		• Redness. Pain.
    		Safety goggles, or face shield.
    		First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor.
  • INGESTION
    		• Nausea.
    		Do not eat, drink, or smoke during work. Wash hands before eating.
    		Rinse mouth. Give plenty of water to drink. Refer for medical attention.
    SPILLAGE DISPOSAL STORAGE PACKAGING & LABELLING
    Sweep spilled substance into sealable containers; if appropriate, moisten first to prevent dusting. Carefully collect remainder. Then remove to safe place (extra personal protection: P2 filter respirator for harmful particles).
    		Separated from acid anhydrides, acid chlorides, oxidants and food and feedstuffs.

    SEE IMPORTANT INFORMATION ON BACK
    ICSC: 0634 Prepared in the context of cooperation between the International Programme on Chemical Safety & the Commission of the European Communities © IPCS CEC 1993

    International Chemical Safety Cards

    BISPHENOL A ICSC: 0634

    I

    M

    P

    O

    R

    T

    A

    N

    T



    D

    A

    T

    A
    PHYSICAL STATE; APPEARANCE:
     WHITE CRYSTALS.

    PHYSICAL DANGERS:
     Dust explosion possible if in powder or granular form, mixed with air.

    CHEMICAL DANGERS:
     Reacts violently with acid anhydrides, acid chlorides, strong bases and strong oxidants.

    OCCUPATIONAL EXPOSURE LIMITS (OELs):
     TLV not established.


    		ROUTES OF EXPOSURE:
     The substance can be absorbed into the body by inhalation of its aerosol and by ingestion.

    INHALATION RISK:
     Evaporation at 20°C is negligible; a nuisance-causing concentration of airborne particles can, however, be reached quickly.

    EFFECTS OF SHORT-TERM EXPOSURE:
     The substance irritates the eyes, the skin and the respiratory tract.

    EFFECTS OF LONG-TERM OR REPEATED EXPOSURE:
     Repeated or prolonged contact may cause skin sensitization.
    PHYSICAL
    PROPERTIES
    Boiling point at 1.7 kPa: 250-252°C
    Melting point: 152-153°C
    Relative density (water = 1): 1.2
    Solubility in water: none
    		Vapour pressure, Pa at 190°C: 87
    Flash point: 207°C o.c.
    Auto-ignition temperature: 600°C
    Octanol/water partition coefficient as log Pow: 3.32
    ENVIRONMENTAL
    DATA
    N O T E S
    ADDITIONAL INFORMATION


    ICSC: 0634 BISPHENOL A
    © IPCS, CEC, 1993
    IMPORTANT LEGAL NOTICE: Neither the CEC or the IPCS nor any person acting on behalf of the CEC or the IPCS is responsible for the use which might be made of this information. This card contains the collective views of the IPCS Peer Review Committee and may not reflect in all cases all the detailed requirements included in national legislation on the subject. The user should verify compliance of the cards with the relevant legislation in the country of use.